How to Calculate Cost of Asphalting a Driveway

How to Calculate Cost of Asphalting a Driveway

How to Calculate Cost of Asphalting a Driveway

Are you in the market for an asphalt driveway? Not sure how much the project will cost out? We’ve got some tips for you. The key one is to try using a purpose-built asphalt driveway cost calculator like the one here:

It’s always a good idea to work out the costs involved in any project before committing yourself to it, to be certain your budget will stretch. Home improvement is a category notorious for costing more than you think it will! Even if you’re trusting the job to contractors, you want to make sure you’ve done an independent cost analysis for asphalting your driveway– otherwise you’ll have no idea if the figures they are quoting you are accurate and fair. Who knows, you may even be able to negotiate a little on the project if you know what’s going into it. With a few easy steps, you’ll soon have an estimate that will empower you and your project.

The method:

  • Start off by making an accurate measurement of the area to be asphalted. For example, if it’s a driveway, make sure you have the length and breadth of each area accurately noted. You may want to add on a couple of inches to accommodate waste.
  • Decide on the depth of asphalt you want for your driveway. If you’re re-laying the drive, you will need to remember to account not only for the new depth, but also any filler areas on the old drive where there’s been damage. If you’re laying a new driveway, or tearing out the old one, you’ll need to measure from the levelled under-surface. It’s normal to look at 2 inches for an average asphalt driveway in Australia, but you should take the advice of your local area and base it on the weigh-bearing needs you have.
  • Give a thought to the asphalt you intend to use. Recycled asphalt is cheaper than pure, but will not wear as well

  • Don’t forget that the asphalt driveway is going to need a base. If you’re repairing the drive, you can ignore this step. If you’re tearing out an old drive, you may have a pre-filled base, depending on how well it has weathered. If you’re laying a new asphalt driveway, the base should be slightly less in are then the asphalt- but at least a few inches deeper.
  • Once you know what type you’d prefer, you can call your local supplier to get the price per square foot for both the top coat and base asphalt. You’ll also need the pricing per square foot of the base stone if it’s a new drive or a complete relay.
  • Calculating the cost is easy from here- multiply the price per square foot by the square feet you require. As the price quoted usually relates to a depth of 1 inch, you’ll want to then multiply the result by the depth you require.
  • If you intend to DIY your asphalt driveway, you need to add in any rental costs on equipment you need. If you intend to hire others to lay the asphalt for you, add in the labour price.
  • If you want to seal the drive afterwards, you’ll need to plan for a few buckets of sealer. If you’re not sure if an entire driveway re-lay is for you, you may want to consider freshening up the existing asphalt driveway with some sealer rather than ripping it out. You’ll need to patch any damage first.

All in all, it’s easy to calculate the cost of asphalting a driveway– just follow these simple steps!

Top 5 asphalt installation contractors in Melbourne

Top 5 asphalt installation contractors in Melbourne

One of the biggest problems that people in counter when thinking about having drivewaysinstalled is who should do it? You hear all these horror stories of people who got cowboy builders, who took their money but never, did the work or did the work to a poor standard, that the very idea of getting home improvement work can be scary. However there are some good contractors out there, who are willing to put the work in, you just need to know where to find them! You can get services in Melbourne get information :


ALL ASH is a company based in Melbourne, who specializes in working with asphalt. You don’t even have to take their word for it, as they have numerous photos of their finished work available on their website. Their website address is, if you want to find out more. They have a free home quote service, so you get a quote that should be spot on the driveway cost. They can do residential or commercial work. If you want to get in touch with them you can through their website, email, phone number or you can stop by the address they provide, to find out more.

Total Care Asphalting

Total Care Asphalting is another company that are based in Melbourne. This company however offer a same day quote, with next day work. This makes them the fastest, if they stand by their claims. They also state that they never take short cuts. Again they do both commercial and residential work. If you want to find out more about them then they do have a website Their website provides all the contact details you might need in order to get in touch. They also have many pictures of finished asphalt work they have done.

Top 5 asphalt installation contractors in Melbourne

Mike Rowley Constructions

Mike Rowley Constructions are another high contender when it comes to Australian driveways made out of asphalt, offering a promise that no other contractor can seem to, which is always staying within budget, so you don’t end up with any nasty surprises down the line. They also have a website that offers pictures of completed work, Again you can find all the relevant information for getting in touch on their website, although they don’t seem to have an email, they only provide a phone number and fax number.

Carrs Asphalt

Carrs Asphalt is another great contractor who specializes in driveways. Not only do they have pictures of work they have finished, but they also keep a list of pretty big names they have worked for in the past. This makes them a sure fire bet for your asphalt needs. There web address is and they offer an address, phone number and email address for you to contact them on, should you want to. They also offer a free quote for any work that you might want doing.

Super Drives

Super Drives are not actually based in Melbourne but do cover the area, when it comes to driveways and asphalt. They also do not have a website, although if you find them on in the yellow pages online, then you can still see pictures of work they have completed. They don’t limit themselves to commercial and residential either as they also work on industrial sites. If you want to get in touch with them about a quote for your driveway cost, then they do have a phone number and an email address for you to do so.

How soon should a driveway be sealed after installation

Top 5 asphalt installation contractors in Melbourne

A common problem with Australian driveways is that people choose asphalt because it is cheaper, but do not know how to properly maintain it afterwards. Meaning that in the long run asphalt can cost far more than the original quote predicted. However if you spend a little time learning how to properly maintain your driveways then you can avoid all the added costs from unnecessary damage.

How soon is too soon?

So naturally once you have had your asphalt driveways installed, you will be wondering when you can finalize the whole thing by coating it in sealant. One day, maybe two, you are probably thinking. Well it may surprise you to know that it can actually take your driveways eight months to properly dry, to the point of being able to have sealant on them.

If you put the sealant on the asphalt too soon, then it will never properly harden. This means that every time you use your driveways you could potentially be causing it damage. Asphalt can have a tendency to go soft in heat anyway, so putting sealant on too soon will really seal its fate.

How do you know your asphalt is ready?

Obviously saying you need to wait around eight months is only helpful to a degree, so you need to know what to look out for, the tell-tale signs that your asphalt driveways are ready to be sealed. So what are the tell-tale signs? Well to start off you need to know that asphalt is petroleum based and because of this, it has a lot of elasticity to it. However over time it loses moisture and becomes brittle, turning a light grey colour. This is when you need to add the sealant, when the asphalt is turning from a deep black to a light grey.

Can you do it yourself?

There is a selection of different sealants you can use on your asphalt driveways, which are all do it yourself. They range in price but start from around $199, which is cheaper than having someone come do it for you. If you want to save even more money, you could buy the sealant in bulk; most distributors offer a bulk buy discount. Your asphalt will need resealing every four to five years after it is initially done, so planning in advance could save you some cash.

How to Calculate Cost of Asphalting a Driveway


A moment of warning

If you are considering sealing your own asphalt then you need to pay careful attention to the sealants instructions. There are some sealants out there that are completely safe to use, however there are some others that are not. A lot of the sealants can actually be corrosive and you need to keep them away from your skin and clothing. They can also have toxic fumes that you want to prevent from inhaling if you can.

It may also be very tempting to add a thick layer of sealant to your asphalt however this isn’t recommended. You actually want to apply two thin layers, the second one after the first one dries. This will ensure that you have the best coverage possible for your asphalt driveways.